|
| how to use & indications |
TECHNIQUE
- Leave prep slightly moist
- No bonding agent required, or other prep treatment
- Clean crown after try-in, 1 quick air-blast to dry
- DO NOT use silane, primers, or other treatments on crown surface
- NOTE: etch lithium disilicate with 5% hydrofluoric acid for 20 seconds
- Mix cement and load crown with Ceramir C&B
- 2 minutes working time after mixing
- Clean-up at gel phase at 3 minutes
- Fully set at 5 minutes
|
INDICATIONS FOR USE
- PFM
- Lithium disilicate
- Zirconia
- Alumina
- Implant crowns
- Pedo stainless steel, layered, and all-zirconia crowns
- Cast and pre-fab metal posts
- Gold inlays/onlays
|
How to use Ceramir Crown & Bridge QuikCap: A Step-by-Step Video